For short distances
movement of medium loads, eg. feed scaffolding and concrete formwork on construction sites
can be bolted to the load at the lowest height

Stable, solid basic construction
Low level is achieved by recessing the mounting plates into side walls. Model… B and …C are the same height
Model B-H (with hardened centerplate) is used, when the roller skate is not moved for a long time under high load. As a result, a pressing of the hardened steel rollers in the standard non-hardened central plate is prevented and ensures a uniformly low rolling resistance
Model B-H-50CrV4 (roll material 50CrV4) is recommended if the risk of short-term overload beyond the specified bearing capacity of the roller skates can not be excluded or is probable

If the rollers are being used to their maximum carrying capacity or with lengthy intervals between use, choose models with a hardened center plate (=model B-H)
In case of possible overload, choose chain roller material 50CrV4
maximum speed: 5m/min
The rolling resistance depends on the track. For smaller models I-IIIv 7-5%, for larger models 5-3% of the total load
Can be arranged with guide rollers

Mod B, B-H

(H= hardened and machined center plate)

B-H-50CrV4

(roller material 50CrV4)

[table id=44 /]